USER GUIDE
Navigate our extensive user guide below and learn how to wield your saber. Reach out to us at support@theorysabers.com. We're here to guide you and ensure you wield a saber worthy of your destiny.
SD-RGB (1 BUTTON)
STANDBY MODE BUTTON OPERATION
(When Blade Is OFF)
Enter Standby Mode: Hold the button until the
button light turns on.
Enter Boot Status: Tap the button after
entering standby mode.
Volume Adjust: Hold the button for 1 second,
then release.
Switch Sound Font: Hold the button for 2
seconds, then release.
Switch Blade Effects: Hold the button for 3
seconds, then release.
Power Saving Mode: Hold the button until you
hear “Power Off” (Automatically activates
after 10 minutes of no operation.)
BUTTON OPERATION
(When Blade Is ON)
Blaster: Tap the button.
Lock-Up: Hold the button for 1 second, then
release.
Switch Blade Color: Hold the button for 2
seconds, then release. → Tap the button to
cycle through colors.
FOC Toggle (On/Off): Hold the button for 3
seconds, then release.
Power Off: Hold the button for 5 seconds, then release.
STANDBY MODE GESTURE OPERATION
Twist On & Off: Twist the saber after entering
standby mode.
Switch Sound Fonts: Point blade upward, hold
the button, then twist the hilt.
Switch BGM: Point blade downward, hold the
button, then twist the hilt.
GESTURE OPERATION (When Blade Is ON)
Switch Blade Effects: Point blade upward,
hold the button, then twist the hilt.
Switch Blade Color: Point blade downward,
hold the button, then twist the hilt.
FOC (Flash on Clash): Hit the saber.
Enter Standby Mode: Twist the saber.
SD-RGB (2 BUTTONS)
STANDBY MODE BUTTON OPERATION
Enter Standby Mode: Hold PWR until you hear
the prompt sound “Power On”.
Enter Boot Status: Tap PWR after entering
standby mode.
Switch Sound Fonts: Tap AUX.
Enter/Exit Volume Adjust Mode: Hold PWR +
AUX until you hear a beep, then release.
While in Volume Adjust Mode: Tap PWR to
increase volume Tap AUX to decrease volume
Switch Blade Effects: Hold AUX for 1 second
until you hear a beep, then release.
Power Off: Click AUX three times.
Power Saving Mode: Activates automatically
after 10 minutes of no operation.
BUTTON OPERATION (When Blade Is ON)
Blaster: Tap AUX
Lock-Up: Hold AUX, then release
Enter Standby Mode: Tap PWR
STANDBY MODE GESTURE OPERATION
Enter Boot Status: Twist the saber after
entering standby mode
Switch Sound Fonts: Blade up → Hold AUX,
then twist the saber
Switch BGM: Blade down → Hold AUX, then
twist the saber
GESTURE OPERATION (When Blade Is ON)
Switch Blade Color: Blade pointed down → Hold
AUX, then twist the saber
FOC (Flash on Clash): Hit the saber
Twist On: Twist The Saber When Off
Twist Off: Twist the saber When ON
SN PRO (1 BUTTON)
STANDBY MODE (BLADE OFF)
Wake Up Saber: Hold button until you hear
“Power On”.
Power ON: Tap the button.
Adjust Volume (3 Levels): Hold button for 1
second, then release to change mode.
Change Blade Style: Hold button for 2
seconds, then release.
Change Ignition Effects: Hold button for 3
seconds, then release.
Change Sound Fonts: Hold button for 4
seconds, then release.
Power Saving Mode: Hold button until “power
off” notification or auto-off after 10 minutes
idle.
POWER ON MODE (BLADE ON)
Blaster Effect: Tap button.
Lock-up: Hold button for 1 second, then
release.
Change Blade Color: Hold button for 2
seconds, then release.
Toggle Flash-on-Clash ON/OFF: Hold Button
for 3 seconds, then release.
Turn OFF: Hold Button for 4 seconds, then
release.
GESTURE CONTROLS
WHILE OFF / IN STANDBY
Power ON: Twist the saber.
Switch Sound Fonts: Hold button + twist
(blade pointing UP).
Switch Background Music: Hold button + twist
(blade pointing DOWN).
WHILE ON
Power OFF: Twist the saber.
Change Blade Color: Hold button + twist
(blade pointing DOWN).
Force Effect: Hold button + twist (blade
pointing UP).
Flash-on-Clash (FOC): Hit the saber.
Drag Effect: Hold button + hit the saber.
Melt Effect: Hold button + thrust saber
forward.
BLADE LENGTH SETUP
Switch Pixel Length (32”cm / 36”): While OFF,
click the button 3 times.
SN PRO (2 BUTTONS)
STANDBY MODE
To Turn On: Press & Hold Power button until
you hear “Power On”.
Switch Sound Fonts: Tap AUX button
Enter Volume Mode: Press & Hold PWR + AUX
at the same time • Tap PWR to increase volume
• Tap AUX to decrease volume
Exit Volume Mode: Press & Hold PWR + AUX
again
Switch Blade Style: Hold PWR for 1 second,
then release
Switch Ignition Style: Hold AUX for 1 second,
then release
Power Saving Mode: Activates after 10
minutes of inactivity
Turn Off: Click AUX Button three times
POWER ON MODE
Turn Off: Tap PWR
Blaster Effect: Tap AUX
Lock-Up: Hold AUX for 1 second, then release
Flash On Clash Toggle (On/Off): Press & Hold
PWR + AUX together
GESTURE CONTROLS
IN STANDBY
Turn On: Twist the saber
Switch BGM: Blade down → Hold AUX, then
twist
Switch Sound Fonts: Blade up → Hold AUX,
then twist
WHEN POWERED ON
Turn Off: Twist the saber
Switch Blade Color: Blade down → Hold AUX,
then twist
Force Effect: Blade up → Hold AUX, then twist
Drag Effect: Hold PWR, then hit the saber
Melt Effect: Hold AUX, then thrust the saber
Flash on Clash (FOC): Hit the saber
BLADE SETTINGS
Adjust Pixel Length: While powered off, tap the main button 5 times → Toggle between 32” and 36”
PROFFIE (1 BUTTON)
POWERING ON/OFF
Ignite (Turn ON): Short click while OFF.
Muted Ignite: Double click + hold while OFF.
Turn OFF (Retract): Hold the button until the
blade turns off.
Toggle Battle Mode: Triple-click + hold while
blade is ON.
SOUND & PRESETS
Play/Stop Music: Double click while OFF.
Next Preset: Hold, then release while OFF.
Previous Preset: Hold and wait while OFF.
VOLUME MENU
Enter/Exit: Hold + clash while OFF.
Volume Down: Hold, then release in Volume
Menu.
Volume Up: Click while in Volume Menu.
BLADE EFFECTS
Blaster Block: Short click while ON.
MULTI-BLAST MODE
Activate: Swing + hold button for 1 sec, then
release.
Exit: Short click while ON.
Clash: Physically clash blade while ON.
In Battle Mode: Clash + pull away quickly.
Lockup: Hold button + clash.
Drag Effect: Hold button + clash while blade tip
points down.
Melt Effect: Hold + thrust forward + clash.
Lightning Block: Double-click + hold while ON.
Force Effect: Hold + twist hilt while ON (point
blade up).
Stab Effect: Thrust forward + clash.
OTHER FEATURES
Color Change Mode: Hold + twist hilt while ON
(blade pointing down).
Select Color: Hold button until you hear a
confirmation sound.
Check Battery Level: Triple-click while OFF.
PROFFIE (2 BUTTONS)
POWERING ON/OFF
Turn ON: Press the Power (PWR) button once
or twist the hilt.
Muted Turn ON: Double-click PWR while OFF.
Turn OFF: Press PWR or twist the hilt (not
while swinging).
Battle Mode Toggle: Hold AUX and swing the
blade (while ON).
SOUND CONTROLS
Play Music:
While OFF: Hold then release PWR.
While ON (blade pointing up): Hold then release
PWR.
Silent Mode: Double-click PWR while OFF.
Volume Adjustment:
Hold PWR + AUX until you hear audible beep.
Click PWR to increase volume.
Click AUX to decrease volume.
Hold PWR + AUX again to exit.
Change Sound Fonts
Next Font: Click AUX while OFF (blade
horizontal or up).
Previous Font: Click AUX while OFF (blade
pointing down).
BLADE EFFECTS
Blaster Block: Click AUX while ON
Multi-Blast Mode:
Hold + release AUX while ON.
Swing to activate blaster shots.
Exit by clicking AUX or triggering any other
effect.
Clash: Hit blade while ON.
Lockup:
Standard: Hold AUX + clash blade.
Battle Mode: Clash + hold blade steady. Pull
away to end.
Drag: Hold AUX + stab down.
In Battle Mode: Stab down + pull away to stop.
Melt: Hold PWR or AUX, thrust, and clash.
Battle Mode: Same, pull away to end.
Lightning Block: Hold PWR, click AUX while ON.
Force Effect: Hold + release PWR while ON.
Stab Effect: Thrust + clash (deactivated in
some styles).
OTHER FEATURES
Color Change Mode:
When Saber is On, Hold AUX, click PWR (blade
horizontal or down).
Rotate hilt to change color.
Click PWR to select/exit.
Video Guides
WHAT’S IN THE BOX?
- Saber
- Blade
- Screw + Tool Pack
- Charging Cable
- TS Blade Plug
- Display Stand & Plaque
- Sticker
Theory Sparks — The Beginning of Something Greater
This brand is the culmination of the journey that started decades ago — a spark of fascination that grew into obsession.
Each saber represents years of inspiration, refinement, and craft.Theory Sabers is more than a store — it's a movement.
More Than a Saber — A Mission to Inspire
I built Theory Sabers so people could see the soul behind every hilt. To bring full transparency to the saber community and to give the BEST we can in every box to those that started it all.
We're not here to make a quick buck, we are here to last with returning customers as excited each time, as new ones.
FAQ
Ensure you remove the protective plastic from the blade. Pre-fit a couple of retention screws before inserting the blade so they are ready to be tightened down.
Insert the blade into the emitter, carefully pressing the pins into their lower position (you will feel the slight resistance of the pins).
Hold the blade in place and tighten down each screw, being careful not to overtighten, finger tight is just fine. Try to avoid using retention points that are opposite each other as this can create a pivot point and allow the blade to move and wobble.
Do not twist the blade when installed as this will damage the connection and potentially kill the blade.
Ensure the saber is not in mute (s4, s16, SD-RGB, SN Pixel) or double check the volume is not set all the way down (Proffie). Please consult your sabers specific user guide for directions on these functions.
Many of our blade styles, whether on SD-RGB or one of our Pixel models, do feature flickering, this is completely normal and nothing to worry about.
We ONLY recommend using a 5v 1amp charging block to charge our sabers, anything more powerful can potentially damage your battery and/or sound board and void your warranty in the process.
If you are not sure what you have, please reach out to the team and have them confirm for you, we are always happy to help.
High-Quality Materials
Built to withstand intense duels and last for years.
Realistic Features
Light and sound effects that mimic the real thing.
Customizable Options
Personalize your saber with various designs and blade colors.
Claim Your Saber Now!
Designed for collectors. Engineered for battle. Elevate your experience with the most advanced saber technology — crafted into every one of our sabers.