Your guide

Your Guide

A picture of the blade component
Your blade

Your blade

Unless otherwise specified, each Theory Saber comes with one of two different types of blades, both of which are available in a variety of sizes.

  • The RGB base-lit blade – a hollow-lightweight blade with a single light source
  • The Premium Pixel Blade – a heavier, fully-lit blade designed for durability, brightness and ultimate wielding power
Your tools

Your tools

A saber is only as good as its toolkit, which is why each Theory Saber comes with everything you need to maintain your saber and forge your destiny.

  • Wrench – to tighten your blade.
  • Retention Screws– to secure your blade to the hilt
  • Charging Cable – to restore power to your saber
  • Battery Charging Adapter – required by select models to ensure your saber can
Cords and tools that come with the unit
A picture of an exposed board in the hilt of the saber
Your board

Your board

The heart and soul of your saber, the board is what powers the lights and sounds that bring your legend to life.

  • RGB Board – a base-lit board that offers standard custom sounds and color changing
  • SNV4 Board – An enhanced board that offers enhanced sound and color control and is better balanced for smoothness in every swing
  • Proffie Board  – The premium saber experience, offering complete control over your sound and blade effects while allowing you even more control to customize sound and gesture effects
Your hilt

Your hilt

The finest hilts in the galaxy, each is meticulously crafted and intentionally designed to be your gateway to another world as you hold it in your hand.

  • Legacy – Crafted to emulate some of the most iconic weapons in the galaxy
  • Weathered – Artifacts of an age long ago, these worn hilts hold stories within
  • Non-Legacy – New Theory Sabers designs, built for a new age
  • Custom – A hilt of your own imagining, customized to your specific vision
A picture of the hilt
Additional resources

Additional resources

Videos

Operation guides

Switch the pixel number between 82cm and 92cm when the power is off by clicking the button three times.

STANDBY MODE

* Wake up: Hold the button until the button light is on, then it will enter the standby mode

* Turn on: Tap the button.

* Adjust volume-3mode: Hold the button until the breath light flashes once, then release.

* Switch boot effect: Hold the button until the breath light flashes twice (or two seconds), then release.

* Switch the blade effects: Hold the button until the breath light flashes three times (or three seconds), then release.

* Switch sound fonts: Hold the button until the breath light flashes Four times (or four seconds), then release.

* Power saving mode: Hold the button until the breathing light is off or until power off sound (or when idle for 10 minutes)

POWER ON

* Blaster: Tap the button.

* Lock-up: Hold the button until the breath light flashes once, then release.

* Color change: Hold the button until the breath light flashes twice then release

* FOC off/on: Hold the button until the breath light flashes Three times, then release.

* Turn off: Hold the button until the breath light flashes Four times, then release.

GESTURE OPERATION

STANDY MODE

* Turn on: Twist the saber.

* Switch Sound fonts: when the blade is up, Hold the button, then twist the saber.

* Switch BGM: when the blade is down, Hold the button, then twist the saber.

POWER ON

* Turn off: Twist the saber.

* Switch the blade color: when the blade is down, Hold the button, then twist the saber.

* Force: when the blade is up, Hold the button, then twist the saber.

* FOC: Hit the saber.

* Drag: Hold the button, then hit the saber.

* Melt: Hold the button, then thrust the saber.

You can switch the pixel number between 82cm and 92cm when the power is off by clicking the main button six times.

STANDBY MODE

*   Turn on: Tap the PWR.

*   Switch Sound fonts: Tap the AUX.

*   Enter volume mode: Tap the PWR and AUX simultaneously.  Then tap the PWR to increase the volume, and tap the AUX to decrease the volume. No put

*   Exit volume mode: Tap the PWR and AUX at the same time

*   Switch boot effect: Hold PWR for one second, then release. Switch blade effects: Hold AUX for one second, then release.

*   Power saving mode: No operation for 10 minutes.

*   Turn off: Click AUX three times.

POWER ON

*   Turn off: Tap PWR.

*   Blaster: Tap AUX.

*   Lock-up: Hold AUX for one second, then release.

*   FOC off/on: Tap PWR and AUX at the same time.

GESTURE OPERATION

STANDBY MODE

*   Turn on: Twist the saber.

*   Switch BGM: When the blade is down, Hold AUX, then twist the saber.

*   Switch Sound Fonts: When the blade is up, Hold AUX, then twist the saber.

POWER ON

*   Turn off: Twist the saber.

*   Switch the blade color: When the blade is down, Hold AUX, then twist the saber.

*   Force: When the blade is up, Hold AUX, then twist the saber.

*   Drag: Hold PWR, then hit the saber.

*   Melt: Hold AUX, then thrust the saber.

* FOC: Hit the saber

TURN ON/OFF

1. “Battle Mode” - triple-click and hold while the blade is ON to toggle mode ON/OFF.

2. Ignite (ON)  - short click while OFF

3. Muted Ignition (ON) - double click and hold while OFF

4. Retract (OFF) - hold and wait till the blade is off while ON

SOUND

1. Play/Stop Music - double click while OFF

2. Enter/Exit Volume Menu - Menu hold+clash while off

3. Volume DOWN/UP - hold and release while in Volume Menu /click while in Volume Menu

4. Next Preset - hold and release while OFF

5. Previous Preset - hold and wait while OFF

BLADE EFFECTS

1. Blast - short click while ON

2. Multi-Blast Mode - swing + hold the button for 1 second and release while ON.  To EXIT Multi-Block mode, short click while ON

3. Clash - clash blade while ON.

In Battle Mode, clash and pull away quickly for "Clash" (requires BEGIN LOCKUP and END LOCKUP styles).

4. Lock up - hold + hit clash while ON

5. Drag - Hold + hit clash while ON pointing the blade tip down

6. Melt - Hold +thrust forward clash while ON

7. Lightning Block - double click and hold the button while ON

8. Force - hold +twist the hilt while on (While pointing up)

9. Stab - thrust forward clash while on

OTHER FEATURES

1. Enter Color Change mode - hold+twist the hilt while

ON (pointing down)

2. Confirm the selected color - hold the button until the confirmation sound

3. Battery Level - triple click while off

TURN ON/OFF

1.    "Battle Mode" - hold AUX and Swing while the blade is ON to toggle mode ON/OFF.

2.    Ignite (ON) - click PWR or Twist On while OFF.

3.    Muted Ignition (ON) - double-click PWR while OFF.

4.    Retract (OFF) - click PWR or TWIST HILT while ON (disabled during swinging)

SOUND

1.    Play Music Track - hold and release PWR while OFF, and hold and release PWR with the blade pointing straight up while ON.

2.    Silent mode - double-click the PWR to mute the saber while OFF.

3.    Adjust volume - hold the PWR/AUX meanwhile to enter/exit the volume adjustment mode after hearing a

"di" sound, click PWR to turn up the volume, click AUX to turn down the volume while OFF

4.    Change Soundfonts

Previous Preset - click AUX while OFF (pointing down)

Next Preset - click AUX while OFF (parallel or up)

BLADE EFFECTS

1.    Blast - click AUX while ON.

2.    Multi-Blast Mode - hold and release AUX while ON to enter mode, Swing to initiate Blasts, and click Aux to exit mode. Lock up, clash, stab, melt, drag, or any button press automatically exits mode.

3. Clash - clash blade while ON.

in Battle Mode clash, pull away quickly for "Clash" (requires BEGIN LOCKUP and END LOCKUP styles).

4.    Lock up - hold AUX and clash while ON. in Battle Mode clash and hold steady to activate, pull away to disengage.

5.    Drag - hold AUX and stab down while ON. in Battle Mode stab down, pull away to disengage.

6.    Melt - hold PWR (or AUX) and thrust forward and clash while ON in Battle Mode thrust and clash to engage, pull away to disengage.

7.    Lightning Block - hold PWR and click AUX while ON.

8.    Force - hold and release PWR while ON.

9.    Stab - thrust forward and clash blade while ON - deactivated in.

OTHER FEATURES

1.    Power Save - hold Aux and click PWR while ON (pointing up) to use Power Save (requires style).

2.    Color Change - hold AUX and click PWR while ON (parallel or down) to enter CCWheel, turn the hilt to rotate through colors, click PWR to select/exit if using COLOR_CHANGE_DIRECT each button, then press advances one Color at a time.

Your saber

Your Saber

Crafted by fans for fans

Product Name
Option 1 / Option 2 / Option 3
Weekly Delivery
Product Discount (-$0)
COUPON1 (-$0)
$0
$0
-
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
+
Cart is empty
Success message won't be visible to user.
Error message won't be visible to user.
Success message won't be visible to user. Coupon title will be listed below if it's valid.
Invalid code
Coupon1
Coupon2
Subtotal
$0
Order Discount
-$0
COUPON2
-$0
Total
$0